钩链检查及使用注意事项
- 2021-08-05-
众所周知,在使用吊索具的过程中,钩子并且链条会随着使用次数的增加而磨损。我们需要检查的原因钩子 and chains so as to ensure the safety of the hoisting operation, especially After the 钩子 and chain have been used for a while. How should we inspect all aspects of 钩子 and chains and what are the precautions? Precautions for the inspection of lifting 钩子: As far as possible, the frequently used 钩子 should be inspected every season. The main purpose is to ensure the two possibilities of the 钩子 body and the dangerous section. When checking the lifting 钩子, wash the 钩子 body with kerosene first, and then use a 20-fold magnifying glass to check the 钩子 body for cracks. If cracks are found, stop using it and replace with a new 钩子.When the high degree of wear of the dangerous section reaches 10% of the original height, it also needs to be replaced in time. Precautions for the inspection of the lifting chain: The normal use temperature range of the lifting chain is between -40°C and 200°C, and it is forbidden to use irregular connectors to link between the chains during use. Avoid the phenomenon of overloading of the chain which will seriously affect the safe service life of the lifting sling. Through the above introduction, we must understand that the safety of the entire lifting operation is inseparable from the correct operation, and it is also inseparable from the inspection and maintenance of the various parts of the lifting sling, so when you use the 钩子 and chain It is necessary to do a good job of inspection in time, and pay attention to the precautions in the operation process, so as to effectively ensure that the lifting sling can achieve safe and reliable hoisting work.